UFO ALARMUFO ALARMBURGLAR ALARMPERSONAL ALARMANTI SNATCHHANDY LIGHTDownload PDF
[Home] [Assembly Instructions] [Personal Alarm Function / Anti-santch Alarm Function] [Burglar Alarm] [Home Burglar Alarm]
            [Away Burglar Alarm] [Drawer Security / Handy Light] [Notes]                                                 

Burglar Alarm (Burglar Alarm Instruction: Indoor Alarm/ Outdoor Alarm/ Window Alarm/ Drawer Alarm)

1. Replace the insulation plugwith the burglar alarm kitby using the burglar alarm plug.
¡@into
2. When the burglar alarm kit v-shaped spring blades open, the alarm siren and strobe light will activate immediately.
¡@into
¡@ And when you close the v-shaped spring bladeswith your fingers, the alarm siren and strobe light stops immediately.
¡@into

NOTE : When the burglar alarm kit is not in use, insert the closed v-shaped spring bladest25into the retaining sockett19of the  
¡@ ¡@¡@ retaining holderfor storage (The same for the soft sleevet21).                                                                            

¡@into  into

3. Attach the door knob strapt01to the snap hook.
¡@into  into

4. Select INSTANT or DELAY alarm mode on the burglar alarm plugt17.

INSTANT MODE¡GINSTANT MODE(switch flipped to the right for INSTANT)
¡@¡@¡@¡@¡@¡@¡@¡@¡@When the door, window or drawer is opened, the alarm siren and strobe light will be activated instantly.
DELAY MODE¡G  DELAY MODE(switch flipped to the left for DELAY)
¡@¡@¡@¡@¡@¡@¡@¡@¡@When the door, window or drawer is opened, the alarm delay procedure is as follows (for 80 seconds):

NOTE : If you want to change the alarm mode (Instant/Delay) while the alarm is triggered, you need to close the v-shaped spring 
¡@¡@¡@  blades first and then flip the switch to the other alarm mode; otherwise the current alarm mode will continue to be active.

TOP